Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: it looks liek 2 layers posted by Penguin on April 29, 2016 at 20:28:22:
The lower piece is just an isolated little closure panel, so you don't look at the damping feet underneath the upper plate. It is not connected to the plate.
The plan is to add a constrained-layer damper of an aluminum plate bonded to the underside of the stone through a visco-elastic film. I'm waiting on the aluminum plate from a friend.
If anybody's interested, you can alculate the plate thickness and stuff from formulas in the Navy scientific papers. The Navy use this approach to quiet the walls of submarines. Vibration of the stone plate is dissipated by the viscoelastic, but it needs to be sandwiched with a constraining layer having around 1/10 the elastic stiffness of the plate you want to damp.
The plate now sits on specific anti-vibration feet similar to the Mapleshade Isoblocks that I purchased from Wagner Motion Control. If they don't work well there's cool alternatives from the link below. Just FYI.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It's a single layer - mr.bear 13:40:47 04/30/16 (5)
- I'm real confused. - Tre' 20:53:58 04/30/16 (4)
- RE: I'm real confused. - mr.bear 15:54:10 05/01/16 (3)
- OK. Got it. Thank you. I have 2 pieces of marble... - Tre' 17:52:52 05/01/16 (2)