|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
|
|
Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: ART 9/VPI Classic? posted by dirtyvinyl on February 7, 2016 at 07:47:44:
Have you gone back and referenced the alignment again? When I set my AT micro lines up on pivot/radial arms after I set the weight and VTA I go back and check the alignment again. Make sure the azimuth is set correctly too. These types of cartridges are very finicky and have to be setup just right. I know it can really try your patience but hang in there.Btw, I just got the Audio technical AT33ptg II and I have not heard any sibilance at all. Even brofore I got it dialed in. But I do have it on a linear tracking tone arm. But I do know the VTA does have big effect on the sound quality.
Try a new or seldom use record that you know doesn't have any issues.
Hope this helps!
Edits: 02/07/16 02/07/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- After each adjustment..... - Cougar 08:53:24 02/07/16 (1)
- RE: After each adjustment..... - dirtyvinyl 09:54:23 02/07/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
