Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Any owners with this combo?
All is well, but I have never been successful at dialing the cart in to eliminate sibalance. It
is at a level that's tolerable, but I'm wondering if others are hearing ZERO sibalance with this setup? Otherwise, I've had the ART9 for about 7 months and hear no reason to upgrade unless I get a ridiculous $$ setup.
I do alignment with a Feikert, using Baerwald and just eyeball the cart level from both front and side view. Tried nudging the SS CI L/R to hear any improvement-nada.
VTA adjustment is at its lowest in pic. Tipping the arm up doesn't seem to make a difference also. I also am using A/S just because.
I was reminded of this minor annoyance after putting a fresh belt on and lube for the bearing. Thanks in advance
This post is made possible by the generous support of people like you and our sponsors:
Topic - ART 9/VPI Classic? - dirtyvinyl 09:35:50 02/06/16 (32)
- Are you sure its not from groove damage?... - EdAInWestOC 05:00:05 03/14/16 (0)
- RE: ART 9/VPI Classic? - SgreenP@MSN.com 10:06:15 03/13/16 (1)
- RE: ART 9/VPI Classic? - dirtyvinyl 11:37:39 03/13/16 (0)
- My sibilance experience - teenage diplomat 19:35:35 02/08/16 (2)
- RE: My sibilance experience - Mel 20:39:15 02/08/16 (1)
- AT ART7 vs. Dl-S1 - teenage diplomat 21:01:59 02/08/16 (0)
- RE: ART 9/VPI Classic? - SgreenP@MSN.com 07:53:13 02/08/16 (1)
- RE: ART 9/VPI Classic? - dirtyvinyl 13:04:57 02/08/16 (0)
- Possibly too much antiskate and azimuth is off - gkirkos 06:24:49 02/08/16 (0)
- Have any of the albums you are using.... - Cougar 13:12:15 02/07/16 (0)
- From the pic... - Cougar 14:17:16 02/06/16 (0)
- RE: ART 9/VPI Classic? - John Elison 11:18:54 02/06/16 (12)
- RE: ART 9/VPI Classic? - dirtyvinyl 13:07:20 02/06/16 (11)
- RE: ART 9/VPI Classic? - flood2 14:34:49 02/06/16 (9)
- RE: ART 9/VPI Classic? - dirtyvinyl 07:47:44 02/07/16 (8)
- RE: ART 9/VPI Classic? - flood2 11:58:04 02/07/16 (0)
- RE: ART 9/VPI Classic? - flood2 10:41:38 02/07/16 (4)
- VTF at 1.82 is exactly were I have my AT33 set at.... - Cougar 13:04:33 02/07/16 (3)
- RE: VTF at 1.82 is exactly were I have my AT33 set at.... - dirtyvinyl 20:50:13 02/07/16 (0)
- RE: VTF at 1.82 is exactly were I have my AT33 set at.... - flood2 13:22:17 02/07/16 (1)
- I have a buddy that stresses over the measurement... - Cougar 13:45:00 02/07/16 (0)
- After each adjustment..... - Cougar 08:53:24 02/07/16 (1)
- RE: After each adjustment..... - dirtyvinyl 09:54:23 02/07/16 (0)
- RE: ART 9/VPI Classic? - John Elison 13:39:58 02/06/16 (0)
- RE: ART 9/VPI Classic? - Mel 11:09:05 02/06/16 (7)
- RE: ART 9/VPI Classic? - dirtyvinyl 13:00:39 02/06/16 (6)
- RE: ART 9/VPI Classic? - blade 07:06:06 03/13/16 (5)
- RE: ART 9/VPI Classic? - blade 19:44:41 03/13/16 (0)
- RE: ART 9/VPI Classic? - dirtyvinyl 09:04:01 03/13/16 (3)
- Something is definitely not right with your setup or cartridge. - Cougar 10:10:45 03/13/16 (2)
- RE: Something is definitely not right with your setup or cartridge. - dirtyvinyl 10:54:15 03/13/16 (1)
- Ok, I think that may be the issue with the Spin Clean. - Cougar 11:12:15 03/13/16 (0)