Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Length of Interconnects from Turntable posted by IT on August 26, 2015 at 09:10:12:
A cartridge signal is at a very low level and moving magnet cartridges are VERY sensitive to cable length. I would only use a long cable if I could place the phono preamp close to the table, then run the amplified signal back to a preamp/receiver over a longer cable.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Length of Interconnects from Turntable - Bry 09:37:02 08/26/15 (1)
- By the way, if you must run a long cable... - Bry 11:14:03 08/26/15 (0)