RE: Cantilever not aligned straight

Posted by Mel (A) on August 26, 2015 at 05:20:06

In Reply to: RE: Cantilever not aligned straight posted by John Elison on August 25, 2015 at 20:59:46:

We've been down this road before. I much prefer the "point it at the arm" type of protractor. They are cheap, often mirrored, and work with any arm. The mirrored arc protractors are expensive, work with only one arm and are, in my opinion, fussy. Also, if the arm is not installed in PRECISELY the specified place, the custom arc protractor is perpetually wrong.

As for the TB one, it looks like it may be a new model and, in any event, has been favorably received by many inmates here as a search will reveal.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Cantilever not aligned straight - Capt. Z 04:51:08 08/25/15 (19)

RE: Cantilever not aligned straight - rindolini 04:06:16 08/29/15 (2)

RE: Cantilever not aligned straight - Capt. Z 05:03:31 08/29/15 (1)

RE: Cantilever not aligned straight - rindolini 10:04:27 08/29/15 (0)

RE: Cantilever not aligned straight - Dual 17:21:03 08/28/15 (0)

RE: Cantilever not aligned straight - John Elison 09:17:03 08/25/15 (3)

RE: Cantilever not aligned straight - Capt. Z 10:40:05 08/25/15 (2)

RE: Cantilever not aligned straight - painter27 17:40:13 08/25/15 (0)

RE: Cantilever not aligned straight - John Elison 15:14:57 08/25/15 (0)

RE: Cantilever not aligned straight - Mel 07:49:03 08/25/15 (5)

RE: Cantilever not aligned straight - Capt. Z 10:43:08 08/25/15 (4)

RE: Cantilever not aligned straight - Mel 20:32:39 08/25/15 (3)

RE: Cantilever not aligned straight - Capt. Z 10:31:51 08/26/15 (0)

RE: Cantilever not aligned straight - John Elison 20:59:46 08/25/15 (1)

RE: Cantilever not aligned straight - Mel 05:20:06 08/26/15 (0)

RE: Short answer... Yes - JBryan 07:31:30 08/25/15 (1)

RE: Short answer... Yes - Capt. Z 07:38:01 08/25/15 (0)

RE: Cantilever not aligned straight - Biff 07:11:57 08/25/15 (2)

RE: Cantilever not aligned straight - louie3 06:24:07 08/26/15 (0)

RE: Cantilever not aligned straight - WntrMute2 03:02:54 08/26/15 (0)

Follow Ups

RE: Cantilever not aligned straight - Mel 05:20:06 08/26/15 (0)

RE: Cantilever not aligned straight

Post a Message!