Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Ken Willis Protractor - Which Mounting Distance? posted by bjh on January 26, 2015 at 15:33:21:
This is the protractor I settled on. BTW, I measured the pivot to spindle
distance to be 211 mm which verifies VE's spec for the PT6 tonearm.
Protractor #1 calls out 210 mm as the mounting distance. To be honest, my
57 yr old eyes could not distinguish much difference if any between the 210B and 211B traces. I did use a magnifying glass but perhaps I should
enlist a younger pair of eyes to be sure the alignment is correct.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Ken Willis Protractor - Which Mounting Distance? - freetowor@yahoo.com 18:44:40 01/26/15 (2)
- RE: Ken Willis Protractor - Which Mounting Distance? - bjh 16:31:10 01/27/15 (0)
- It does not really matter, they both kinda wrong - Penguin 21:09:56 01/26/15 (0)