RE: Anyone know where to find out the cartridge 'rise time'?

Follow Ups Full Thread

Topic - Anyone know where to find out the cartridge 'rise time'? - andyr 19:18:50 10/21/14 (72)

Cartridge output slew rate equates to stylus acceleration - Luckydog 15:06:40 10/28/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - neobop 05:48:06 10/23/14 (1)

RE: Anyone know where to find out the cartridge 'rise time'? - John Elison 10:42:46 10/23/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - amioutaline? 07:24:23 10/22/14 (5)

RE: Anyone know where to find out the cartridge 'rise time'? - painter27 18:26:34 10/22/14 (4)

RE: Anyone know where to find out the cartridge 'rise time'? - andyr 03:45:54 10/23/14 (3)

Nevermind the FR graphs... - kuma 16:13:28 10/23/14 (2)

I'm not surprised in the least, kuma ... - andyr 18:19:15 10/23/14 (1)

They know their core customer base well ... - kuma 10:13:53 10/24/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - AJ 04:50:26 10/22/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - John Elison 20:56:49 10/21/14 (60)

Those ruler-flat charts always amuse me. - Dave Pogue 06:17:59 10/22/14 (28)

RE: Those ruler-flat charts always amuse me. - John Elison 06:57:01 10/22/14 (27)

"there's no appreciable difference in FR for MC cartridges at 47k-ohms or 100-ohms" ... - andyr 14:31:06 10/22/14 (5)

RE: "there's no appreciable difference in FR for MC cartridges at 47k-ohms or 100-ohms" ... - bjh 17:59:22 10/22/14 (4)

RE: "there's no appreciable difference in FR for MC cartridges at 47k-ohms or 100-ohms" ... - John Elison 19:37:32 10/22/14 (3)

Yeah that's all understandable, John. ... - andyr 03:52:12 10/23/14 (2)

RE: Yeah that's all understandable, John. ... - John Elison 09:09:21 10/23/14 (1)

Understood - thanks, John. nt - andyr 12:22:15 10/23/14 (0)

RE: Those ruler-flat charts always amuse me. - MikeWI 14:00:33 10/22/14 (4)

RE: Those ruler-flat charts always amuse me. - bjh 17:50:45 10/22/14 (3)

BTW, altering loading away from 47K can also deliver better sound with MMs! :-)) ... - andyr 18:11:09 10/22/14 (2)

Most MMs are more highly reactive than LO MCs - Timbo in Oz 02:38:16 10/23/14 (1)

And so, Tim? Can you elucidate, please. nt - andyr 03:01:26 10/23/14 (0)

Wow, hit a nerve :-) - Dave Pogue 07:05:12 10/22/14 (15)

RE: Wow, hit a nerve :-) - John Elison 10:39:53 10/22/14 (13)

Looked through 14 cartridge boxes - Dave Pogue 14:21:55 10/22/14 (12)

mail sent - ringwear 17:38:21 10/22/14 (0)

RE: Looked through 14 cartridge boxes - John Elison 14:42:16 10/22/14 (10)

RE: Looked through 14 cartridge boxes - Dave Pogue 14:49:13 10/22/14 (9)

RE: Looked through 14 cartridge boxes - John Elison 15:15:40 10/22/14 (8)

I did look again. - Dave Pogue 16:07:42 10/22/14 (7)

So, what's your point? - John Elison 17:26:13 10/22/14 (6)

Same as it's always been. - Dave Pogue 18:05:07 10/22/14 (5)

RE: Same as it's always been. - bjh 18:11:37 10/22/14 (4)

Bernard, that's ridiculous. - Rick W 20:10:51 10/22/14 (2)

Get a room nt - bjh 20:15:28 10/22/14 (1)

Ran outta prune juice again? nt - Rick W 20:57:48 10/22/14 (0)

Oh My. - Dave Pogue 18:22:13 10/22/14 (0)

in the good old times - Penguin 08:41:51 10/22/14 (0)

"Rise-time = 0.35 ÷ Bandwidth" ... - andyr 21:22:15 10/21/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - Theron D 21:15:36 10/21/14 (29)

RE: Anyone know where to find out the cartridge 'rise time'? - John Elison 22:48:22 10/21/14 (28)

"However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - Rick W 12:29:39 10/22/14 (24)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - John Elison 13:19:04 10/22/14 (23)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - flood2 18:25:01 10/22/14 (11)

Interesting! Thanks!... - John Elison 19:13:28 10/22/14 (10)

RE: Interesting! Thanks!... - flood2 01:25:30 10/23/14 (4)

RE: Interesting! Thanks!... - John Elison 10:29:06 10/23/14 (3)

Limitations of white noise.. - flood2 16:03:04 10/23/14 (2)

RE: Limitations of white noise.. - John Elison 17:22:16 10/23/14 (1)

RE: Limitations of white noise.. - flood2 03:59:09 10/25/14 (0)

Martin has pretty interesting measurements in this article - Penguin 20:46:03 10/22/14 (4)

RE: Martin has pretty interesting measurements in this article - John Elison 21:32:58 10/22/14 (3)

I would pick up a used microphone pre - Penguin 06:32:59 10/23/14 (2)

RE: I would pick up a used microphone pre - John Elison 08:51:55 10/23/14 (1)

Cool beans - Penguin 09:28:56 10/23/14 (0)

Your experience? Have you measured the FR of any of the mm's I listed? - Rick W 14:42:16 10/22/14 (4)

RE: Your experience? Have you measured the FR of any of the mm's I listed? - John Elison 14:48:24 10/22/14 (3)

C'mon, John. "....a number of moving magnet cartridges"? - Rick W 15:12:30 10/22/14 (2)

RE: C'mon, John. "....a number of moving magnet cartridges"? - John Elison 15:31:49 10/22/14 (1)

No rush. Take your time. - Rick W 21:39:31 10/22/14 (0)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - frankwm 14:15:49 10/22/14 (2)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - hahax@verizon.net 20:46:00 10/22/14 (1)

almost all the sweeps used for the FR measurements - Penguin 20:51:11 10/22/14 (0)

hmmm - Penguin 14:09:54 10/22/14 (2)

RE: hmmm - John Elison 14:56:06 10/22/14 (1)

Yup - Penguin 15:02:14 10/22/14 (0)

Rise times may be the same for MM and MC - Penguin 08:31:56 10/22/14 (1)

RE: Rise times may be the same for MM and MC - hahax@verizon.net 20:50:41 10/22/14 (0)

Thank you John for your thoughts! Best Theron NT - Theron D 06:33:46 10/22/14 (0)

RE: Anyone know where to find out the cartridge 'rise time'? - hahax@verizon.net 20:29:49 10/21/14 (0)

Follow Ups

RE: Anyone know where to find out the cartridge 'rise time'? - Theron D 21:15:36 10/21/14 (29)

RE: Anyone know where to find out the cartridge 'rise time'? - John Elison 22:48:22 10/21/14 (28)

"However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - Rick W 12:29:39 10/22/14 (24)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - John Elison 13:19:04 10/22/14 (23)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - flood2 18:25:01 10/22/14 (11)

Interesting! Thanks!... - John Elison 19:13:28 10/22/14 (10)

RE: Interesting! Thanks!... - flood2 01:25:30 10/23/14 (4)

RE: Interesting! Thanks!... - John Elison 10:29:06 10/23/14 (3)

Limitations of white noise.. - flood2 16:03:04 10/23/14 (2)

RE: Limitations of white noise.. - John Elison 17:22:16 10/23/14 (1)

RE: Limitations of white noise.. - flood2 03:59:09 10/25/14 (0)

Martin has pretty interesting measurements in this article - Penguin 20:46:03 10/22/14 (4)

RE: Martin has pretty interesting measurements in this article - John Elison 21:32:58 10/22/14 (3)

I would pick up a used microphone pre - Penguin 06:32:59 10/23/14 (2)

RE: I would pick up a used microphone pre - John Elison 08:51:55 10/23/14 (1)

Cool beans - Penguin 09:28:56 10/23/14 (0)

Your experience? Have you measured the FR of any of the mm's I listed? - Rick W 14:42:16 10/22/14 (4)

RE: Your experience? Have you measured the FR of any of the mm's I listed? - John Elison 14:48:24 10/22/14 (3)

C'mon, John. "....a number of moving magnet cartridges"? - Rick W 15:12:30 10/22/14 (2)

RE: C'mon, John. "....a number of moving magnet cartridges"? - John Elison 15:31:49 10/22/14 (1)

No rush. Take your time. - Rick W 21:39:31 10/22/14 (0)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - frankwm 14:15:49 10/22/14 (2)

RE: "However, nearly all MM cartridges have bandwidths less than 25-kHz...." Again? - hahax@verizon.net 20:46:00 10/22/14 (1)

almost all the sweeps used for the FR measurements - Penguin 20:51:11 10/22/14 (0)

hmmm - Penguin 14:09:54 10/22/14 (2)

RE: hmmm - John Elison 14:56:06 10/22/14 (1)

Yup - Penguin 15:02:14 10/22/14 (0)

Rise times may be the same for MM and MC - Penguin 08:31:56 10/22/14 (1)

RE: Rise times may be the same for MM and MC - hahax@verizon.net 20:50:41 10/22/14 (0)

Thank you John for your thoughts! Best Theron NT - Theron D 06:33:46 10/22/14 (0)

Post a Message!