Wrong again

Wrong again

Posted by neobop (A) on September 1, 2014 at 20:48:01

In Reply to: RE: You could also cut off..... posted by flood2 on September 1, 2014 at 18:28:20:

> I just pointed out that the ATN150MLX is not an ideal match to the 440 body given identical load conditions... which is a fact. If not, AT would have the same body for both and just add the extra cosmetics to justify the higher cost. <

It's nonsense. The 440 has the same generator as the 155LC, 152MLP, and the 160ML, among others. 490mH, 790/3200 ohms. They came with beryllium cantilevers while the 140LC and 142LP (same motor) have aluminum.

The fact of the matter is, if you load the cart at 47K/<200pF, response is dramatically better with the exotic cantilevered stylus. If you ever tried it you wouldn't post such statements.

neo

BIRD LIVES

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - VTA AT 440MLA - Paully 10:28:58 08/30/14 (13)

RE: VTA AT 440MLA - neobop 07:27:00 09/02/14 (1)

RE: VTA AT 440MLA - Paully 14:23:20 09/02/14 (0)

For specified VTA... - Doug G. 14:18:46 08/31/14 (1)

RE: For specified VTA... - Paully 15:06:31 08/31/14 (0)

RE: VTA AT 440MLA - neobop 15:11:24 08/30/14 (7)

RE: VTA AT 440MLA - flood2 19:24:55 08/31/14 (4)

You could also cut off..... - neobop 07:50:53 09/01/14 (3)

RE: You could also cut off..... - flood2 18:28:20 09/01/14 (2)

Wrong again - neobop 20:48:01 09/01/14 (1)

RE: Wrong again - flood2 00:47:56 09/02/14 (0)

RE: VTA AT 440MLA - Paully 18:17:28 08/30/14 (0)

RE: VTA AT 440MLA - goblin141 17:25:15 08/30/14 (0)

RE: VTA AT 440MLA - Skip Pack 14:51:31 08/30/14 (0)

Follow Ups

Wrong again - neobop 20:48:01 09/01/14 (1)

RE: Wrong again - flood2 00:47:56 09/02/14 (0)

Post a Message!