Closeup of Idler Wheel Tension Spring

Posted by tubav (A) on August 19, 2014 at 10:40:14

In Reply to: Re-purposed Dual 1019 posted by tubav on August 19, 2014 at 08:57:25:

I discovered that I eliminated a long curved arm that controlled on/off plus and idler wheel tension spring.
I was glad to get rid of the long curved arm as it would vibrate, so here is what I came up with for the idler tension spring.
As the plinth comes together, I'll post more pics.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Re-purposed Dual 1019 - tubav 08:57:25 08/19/14 (16)

RE: Re-purposed Dual 1019 - Munkie_NL 01:16:47 08/21/14 (2)

RE: Re-purposed Dual 1019 - ejman 16:25:31 08/24/14 (0)

RE: Re-purposed Dual 1019 - goblin141 07:28:16 08/24/14 (0)

Pic Of Top Plinth Layer - tubav 14:24:54 08/20/14 (0)

RE: Re-purposed Dual 1019 - Munkie_NL 03:43:26 08/20/14 (1)

RE: Re-purposed Dual 1019 - ejman 07:29:32 08/20/14 (0)

Photo of my 1019: - cactuscowboy@bresnan.net 20:50:57 08/19/14 (1)

Wow, that looks like a real boat anchor. Good luck. nt - alaskahiatt 15:03:57 08/20/14 (0)

RE: Re-purposed Dual 1019 - Qman 14:45:01 08/19/14 (0)

Closeup of Idler Wheel Tension Spring - tubav 10:40:14 08/19/14 (0)

Pic of 1019 Underside - tubav 10:35:12 08/19/14 (0)

Thanks - dee eye why 09:14:30 08/19/14 (4)

RE: Thanks - cactuscowboy@bresnan.net 12:17:01 08/19/14 (3)

Hi Cactus - tubav 13:39:25 08/19/14 (2)

RE: Hi Cactus - mosin 17:51:21 08/19/14 (1)

RE: Hi Cactus and a howdy back from Wyoming! - cactuscowboy@bresnan.net 19:30:29 08/19/14 (0)

Follow Ups

Closeup of Idler Wheel Tension Spring - tubav 10:40:14 08/19/14 (0)

Closeup of Idler Wheel Tension Spring

Post a Message!