Use the "Rega nudge" on startup.

Follow Ups Full Thread

Topic - VPI Traveler Finally Up and Running - badteacher 16:50:42 08/17/14 (82)

Just to bring this all home. - StephenJK 17:00:09 08/19/14 (4)

RE: Just to bring this all home. - badteacher 13:25:07 08/20/14 (1)

No Worries...... - StephenJK 14:11:49 08/20/14 (0)

RE: Just to bring this all home. - The Dill 19:26:38 08/19/14 (1)

RE: Just to bring this all home. - StephenJK 05:14:01 08/20/14 (0)

Which dealer did you buy your table from? - Curious 19:56:46 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - The Dill 19:12:41 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - bluemooze 17:58:14 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - Lakeshore Larry 13:00:54 08/18/14 (4)

RE: VPI Traveler Finally Up and Running - badteacher 20:23:06 08/18/14 (3)

"I bought the TT while out of town on a weekend trip from a small dealer California." - Curious 20:31:51 08/18/14 (2)

RE: "I bought the TT while out of town on a weekend trip from a small dealer California." - Plinko 16:55:50 08/19/14 (1)

RE: "I bought the TT while out of town on a weekend trip from a small dealer California." - Curious 19:20:36 08/19/14 (0)

Just one question - Plinko 12:37:48 08/18/14 (0)

start up noise - texanater 06:42:40 08/18/14 (19)

Use the "Rega nudge" on startup. - Opus 33 1/3 08:41:00 08/18/14 (17)

RE: Use the "Rega nudge" on startup. - badteacher 20:16:31 08/18/14 (0)

I started doing this with a TD160 (1970's) that would often... - DeKay 17:53:39 08/18/14 (1)

LOL. Definitely NOT for idlers!!!! /nt\ - Opus 33 1/3 01:37:15 08/19/14 (0)

I've always done that with my belt drive tables. - volunteer 08:42:57 08/18/14 (13)

Yup. Same here. /nt\ - Opus 33 1/3 08:46:35 08/18/14 (12)

I've always never had to do that. - Travis 16:17:26 08/18/14 (11)

It always struck me ... - Dave Pogue 05:37:33 08/19/14 (7)

RE: It always struck me ... - Lakeshore Larry 06:00:11 08/19/14 (6)

RE: It always struck me ... - Dave Pogue 07:33:09 08/19/14 (5)

RE: It always struck me ... - Lakeshore Larry 06:19:52 08/20/14 (4)

Skid marks!!! - Dave Pogue 06:30:10 08/20/14 (3)

RE: Skid marks!!! - Lakeshore Larry 06:53:12 08/20/14 (2)

Since you're a little light in the Lenco department ... - Dave Pogue 07:30:54 08/20/14 (1)

RE: Since you're a little light in the Lenco department ... - Lakeshore Larry 08:01:44 08/20/14 (0)

Didn't say one has to, but think about it. - Opus 33 1/3 17:35:39 08/18/14 (2)

RE: Didn't say one has to, but think about it. - Travis 06:33:05 08/19/14 (1)

You may continue your "no nudge" approach. - Opus 33 1/3 07:51:09 08/19/14 (0)

I have an original Traveler. - volunteer 06:54:40 08/18/14 (0)

Its your money - Maniac 06:34:20 08/18/14 (0)

Excuses...excuses is all I hear from VPI - plugmein 05:43:20 08/18/14 (25)

Have you ever owned a VPI tt/arm? nt - Rick W 08:24:48 08/18/14 (24)

Yes! - plugmein 09:53:40 08/18/14 (23)

Had a problem not satisfactorily addressed by VPI? Asking because....... - Rick W 10:11:49 08/18/14 (22)

RE: Had a problem not satisfactorily addressed by VPI? Asking because....... - John Elison 10:22:20 08/18/14 (21)

Huh? - Rick W 10:44:42 08/18/14 (20)

RE: Huh? - John Elison 11:25:39 08/18/14 (19)

RE: Huh? - middleground 09:52:42 08/19/14 (1)

RE: Poor baby. - Travis 13:16:00 08/19/14 (0)

Have you ever owned a successful business? - TheBrewmaster 16:55:57 08/18/14 (2)

RE: Have you ever owned a successful business? - John Elison 17:37:48 08/18/14 (1)

RE: Have you ever owned a successful business? - TheBrewmaster 17:53:32 08/18/14 (0)

The lesson learned ??? - reelsmith. 13:45:08 08/18/14 (1)

RE: The lesson learned ??? - badteacher 20:28:02 08/18/14 (0)

RE: Huh? - RSF 13:18:18 08/18/14 (0)

You can't find the "excuses" in Harry's post simply because there weren't any. - Rick W 12:01:04 08/18/14 (10)

Everything HW wrote was an excuse... - John Elison 15:10:25 08/18/14 (8)

RE: Everything HW wrote was an excuse... - middleground 10:02:24 08/19/14 (0)

Not quite - Brian Walsh 18:15:35 08/18/14 (0)

RE: No arguing with that - amioutaline? 17:00:41 08/18/14 (5)

RE: No arguing with that - The Dill 17:59:43 08/18/14 (4)

RE: No arguing with that - Plinko 18:49:37 08/18/14 (3)

RE: No arguing with that - The Dill 19:03:40 08/18/14 (2)

Answer - bad teacher did go through the dealer - Plinko 16:50:12 08/19/14 (0)

Not what I was referring to - Plinko 16:29:27 08/19/14 (0)

RE: You can't find the "excuses" in Harry's post simply because there weren't any. - unclestu 12:30:50 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - middleground 05:36:51 08/18/14 (3)

RE: "Makes one miss Japanese direct drives of years gone by no?" - amioutaline? 05:45:18 08/18/14 (2)

RE: "Makes one miss Japanese direct drives of years gone by no?" - middleground 08:39:04 08/18/14 (1)

The inflation calculator that I use indicates 4,457.46; a far cry from 30 - 40K. )MT( - J. S. Bach 13:27:47 08/19/14 (0)

RE: VPI Traveler Finally Up and Running - HW 21:47:29 08/17/14 (1)

hang in there Harry - unclestu 01:30:17 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - John Elison 18:47:17 08/17/14 (8)

RE: VPI Traveler Finally Up and Running - HW 21:38:33 08/17/14 (6)

RE: VPI Traveler Finally Up and Running - middleground 05:43:59 08/18/14 (0)

"retired, I can say whatever is on my mind. HW" - volunteer 05:22:39 08/18/14 (0)

RE: Dealers vs Distributors - Lakeshore Larry 04:50:23 08/18/14 (2)

RE: In fairness to Music Direct - amioutaline? 05:37:28 08/18/14 (1)

Agreed - Plinko 12:42:15 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - John Elison 21:51:50 08/17/14 (0)

RE: VPI Traveler Finally Up and Running - bluemooze 19:57:50 08/17/14 (0)

RE: VPI Traveler Finally Up and Running - amioutaline? 17:02:08 08/17/14 (4)

RE: VPI Traveler Finally Up and Running - HW 21:49:51 08/17/14 (0)

RE: VPI Traveler Finally Up and Running - badteacher 17:11:49 08/17/14 (2)

RE: VPI Traveler Finally Up and Running - amioutaline? 17:59:05 08/17/14 (1)

“Herbie has a ‘Donut Hole’ mod specifically for the Traveler” - Charlie F. 11:16:53 08/18/14 (0)

RE: VPI Traveler Finally Up and Running - middleground 16:53:36 08/17/14 (0)

Follow Ups

Use the "Rega nudge" on startup. - Opus 33 1/3 08:41:00 08/18/14 (17)

RE: Use the "Rega nudge" on startup. - badteacher 20:16:31 08/18/14 (0)

I started doing this with a TD160 (1970's) that would often... - DeKay 17:53:39 08/18/14 (1)

LOL. Definitely NOT for idlers!!!! /nt\ - Opus 33 1/3 01:37:15 08/19/14 (0)

I've always done that with my belt drive tables. - volunteer 08:42:57 08/18/14 (13)

Yup. Same here. /nt\ - Opus 33 1/3 08:46:35 08/18/14 (12)

I've always never had to do that. - Travis 16:17:26 08/18/14 (11)

It always struck me ... - Dave Pogue 05:37:33 08/19/14 (7)

RE: It always struck me ... - Lakeshore Larry 06:00:11 08/19/14 (6)

RE: It always struck me ... - Dave Pogue 07:33:09 08/19/14 (5)

RE: It always struck me ... - Lakeshore Larry 06:19:52 08/20/14 (4)

Skid marks!!! - Dave Pogue 06:30:10 08/20/14 (3)

RE: Skid marks!!! - Lakeshore Larry 06:53:12 08/20/14 (2)

Since you're a little light in the Lenco department ... - Dave Pogue 07:30:54 08/20/14 (1)

RE: Since you're a little light in the Lenco department ... - Lakeshore Larry 08:01:44 08/20/14 (0)

Didn't say one has to, but think about it. - Opus 33 1/3 17:35:39 08/18/14 (2)

RE: Didn't say one has to, but think about it. - Travis 06:33:05 08/19/14 (1)

You may continue your "no nudge" approach. - Opus 33 1/3 07:51:09 08/19/14 (0)

Post a Message!