Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

Well, I found how to make it go away...

But it really is a weird kick in the pants. Just to be clear, I have the ground from my DIN cable grounded to the Plinius phono preamp. The Plinius has its own power supply which terminates in a three prong plug. The VPI PLC has a captive power cord that terminates in a three prong plug. They are both plugged into my Haley power conditioner. Up until this started happening everything was working like a Swiss watch.

I started troubleshooting. The first thing I did was remove the cart. Much as I hated to do that it seemed like a smart first step; it gave me a chance to carefully examine the wires inside the cart and take another, better look at the whole thing under the Dino-Lite. That all looked good. With the cart removed I turned on the system and was still getting hum (I made sure the cartridge clips were not touching). Long story short - I had to unground the DIN cable from the Plinius and run the DIN cable ground directly to the VPI PLC! I never in a million years ever did that before. For some reason now that's the only way to make the hum go away.

Okay experts - what in the world does this suddenly suggest?


This post is made possible by the generous support of people like you and our sponsors:
  Western Glow Tube Service  


Follow Ups Full Thread
Follow Ups
  • Well, I found how to make it go away... - tonyptony 14:57:47 07/29/14 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.