Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Linn LP 12 problem posted by docw on July 19, 2014 at 11:39:44:
Sounds like you have a Valhalla power supply.
Get the schematic and check voltages on the board. See what voltages you are getting to the motor.
If the voltages are right, probably the motor.
If not, something on the board. Electrolytics could be a likely culprit.
With the Valhalla board plugged in there is power going through it all the time, regardless of whether you have the unit on or off.
Replacement motors are available and it is possible to repair/revise the Valhalla boards.
David
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Linn LP 12 problem - kintyre695 11:49:59 07/19/14 (3)
- If the power supply is original, it cant' be Valhala... - kuma 15:44:44 07/19/14 (2)
- RE: If the power supply is original, it cant' be Valhala... - kintyre695 19:03:42 07/19/14 (1)
- "The original supply was an illuminated red rocker"? ... - andyr 19:27:45 07/20/14 (0)