Home Vinyl Asylum

Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ.

RE: I thought I'd enjoy my afternoon of cartridge changing

I have a Classic 3 Arm and had the same issue. I contracted VPI and they told me to adjust the allen head screw which is located in the top middle of the arm just above the central pivot point. By adjusting this screw you can raise the entire height of the arm up or down depending on the type of cartridge you have. Prior to this I had the VTA adjusted on the tower all the way down and this was still not enough to get the arm parallel with the record and I had the same issues with the cuing mechanism even with the adjustments.

This completely solved the problem. Why they don't include this information in the operating manual is beyond me.

I hope this helps you.


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.