RE: Sansui FR-4060

Posted by ppopp (A) on March 6, 2013 at 15:29:51

In Reply to: Sansui FR-4060 posted by jared0216 on March 6, 2013 at 15:14:53:

Well worth the effort. I have a similar deck (SR-313) and it roasted my 2009 model VPI Scout comprehensively.
Add a drop or two of sewing machine oil to the bearing and the rest should just be about getting the vertical tracking force, anti-skating and cartridge alignment right....with a new stylus of course.
I wouldn't suggest using a stylus which has been sitting that long to dig the groove of any beloved vinyl.
Replace the mat and use a good set of interconnects for the best results.
Oh yeah and place it on three tennis ball halves to keep micro-vibrations at bay on the cheap.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Sansui FR-4060 - jared0216 15:14:53 03/06/13 (12)

RE: Sansui FR-4060 - spindoctor 12:55:49 03/09/13 (1)

RE: Sansui FR-4060 - njcliff10@yahoo.com 11:34:54 06/12/14 (0)

Nothing beats a well cared for piece of vintage equipment - Ripple 14:18:11 03/07/13 (2)

RE: Nothing beats a well cared for piece of vintage equipment - jared0216 16:43:56 03/07/13 (1)

Could be either mechanical or electrical.... - Ripple 17:43:55 03/08/13 (0)

Here's a thought... - fishy 18:26:43 03/06/13 (0)

Vinyl Engine is your friend - Phil_S 18:21:44 03/06/13 (0)

Nice turntable! - Cuernavaca 16:27:11 03/06/13 (0)

RE: Sansui FR-4060 - ppopp 15:29:51 03/06/13 (3)

RE: Sansui FR-4060 - jared0216 15:54:20 03/06/13 (2)

RE: Sansui FR-4060 - Cuernavaca 13:14:16 03/07/13 (1)

RE: Sansui FR-4060 - jared0216 14:10:15 03/07/13 (0)

Follow Ups

RE: Sansui FR-4060 - ppopp 15:29:51 03/06/13 (3)

RE: Sansui FR-4060 - jared0216 15:54:20 03/06/13 (2)

RE: Sansui FR-4060 - Cuernavaca 13:14:16 03/07/13 (1)

RE: Sansui FR-4060 - jared0216 14:10:15 03/07/13 (0)

RE: Sansui FR-4060

Post a Message!