Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Rega Headache posted by volunteer on August 14, 2012 at 14:34:25:
Make sure your table is level.
1.75 - 2.00 tracking force is probably OK (usually you get to choose from within a range, and you may have to go on the high side).
Adjust antiskate according to the 'test record' but not with the Rega guide numbers - don't know how accurate they are. If you fudge a little on anti-skate, no one will notice, including yourself.
Rethink the situation: Did you really allign the cartridge properly??
(I will usually pull the counter-weight as far back as possible. Adjust the numeric dial so that I can get the proper weight using a Shure gauge at that point. Make sure your cartridge position is correct! Repeat whole procedure if you make any changes.)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Have to agree - jedrider 15:09:33 08/14/12 (7)
- RE: Have to agree - bigblueoxe 15:42:13 08/14/12 (1)
- OK a couple things to check - Penguin 20:34:56 08/14/12 (0)
- best purchase I ever made - mbnx01 15:13:35 08/14/12 (4)
- RE: best purchase I ever made - bigblueoxe 15:40:16 08/14/12 (3)
- RE: "Have to think about the stylus gauge." - 1973shovel 16:45:33 08/14/12 (2)
- RE: "Have to think about the stylus gauge." - bigblueoxe 17:11:56 08/14/12 (1)
- RE: "Have to think about the stylus gauge." - bacobits 06:05:48 08/15/12 (0)