Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: Need help with Ashland motor and capacitor posted by banpuku on August 13, 2012 at 09:43:38:
OK, I'll take shot here. The combined motor wires (blue/red) should be connected to AC hot (in the US, the black wire). The other two wires (black and green) should be connected across the capacitor (one wire at each end of the cap - the capacitor is non-polarized), with the AC neutral (white in the US) connected to (most likely) the black motor wire and its associated capacitor lead. If the motor runs in the correct direction, you're fine. If not, switch the AC neutral (white wire in the US) to the green motor lead.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need help with Ashland motor and capacitor - Richard P 10:25:55 08/14/12 (3)
- RE: Need help with Ashland motor and capacitor - banpuku 10:52:48 08/14/12 (2)
- RE: Need help with Ashland motor and capacitor - Richard P 07:16:14 08/15/12 (1)
- RE: Need help with Ashland motor and capacitor - banpuku 09:21:06 08/15/12 (0)