RE: replinthing empires

Posted by berndt (A) on July 24, 2012 at 09:31:49

In Reply to: RE: replinthing empires posted by CometCKO on July 24, 2012 at 09:18:44:

I've gone pretty much teres style with my latest. The replinths I've done for 208's have used dynamat as a beginning with the stock plinth. I've used dynamat cut in circles and stuffed under the platter to mitigate its ringing. I've made plinths of 1.5" aluminum plate and 1" phenolic..
I've used regarding arms originally but now have gone to a project 10cc evolution. Also have mounted kuzmas.
I've used natural gum rubber in 1/4" thickness for a "constrained" layer in my assemblies.
Sometimes the resonance can be desireable. I've noticed you can overdamp a mechanism too. Maximum damping may not be the goal. Damping tunability is a boon to the diyer.

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - Constrained Layer Damping and the VPI Classic 3 (long) - CometCKO 15:45:54 07/23/12 (11)

RE: Constrained Layer Damping and the VPI Classic 3 (long) - HW 06:33:51 07/27/12 (5)

RE: Constrained Layer Damping and the VPI Classic 3 (long) - CometCKO 08:11:42 07/27/12 (4)

adhesives vs fasteners - berndt 12:33:38 07/27/12 (3)

Excellent point! - CometCKO 12:40:37 07/27/12 (2)

clamp material - berndt 12:58:59 07/27/12 (1)

Well that's a more easily testable proposition than adhesive differences! - CometCKO 16:05:31 07/27/12 (0)

replinthing empires - berndt 01:09:10 07/24/12 (4)

RE: replinthing empires - CometCKO 09:18:44 07/24/12 (3)

RE: replinthing empires - berndt 09:31:49 07/24/12 (2)

Berndt's other TT - 33dot33rpm 11:39:32 07/24/12 (1)

RE: Berndt's other TT - berndt 11:41:01 07/24/12 (0)

Follow Ups

RE: replinthing empires - berndt 09:31:49 07/24/12 (2)

Berndt's other TT - 33dot33rpm 11:39:32 07/24/12 (1)

RE: Berndt's other TT - berndt 11:41:01 07/24/12 (0)

RE: replinthing empires

Post a Message!