Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
Do you know what size hex nuts you used so I can pick them up at the hardware store?
"I've got a P3-24 and currently have an Ortofon 2MBlue on it. I have a DL-110 on order. Both of these cartridges are within 0.4mm in height. I found that a perfect 4mm shim was to find 3 regular (nickel plated) hex nuts. They are about 4mm each in height. I Just plopped them under the 3 points of the Rega arm and TA DA a perfect 4mm shims. My 2M Blue sits perfectly level with the platter."
See ya. Dave
This post is made possible by the generous support of people like you and our sponsors:
Topic - pinging Time Stands Still - Jive Turkey 09:30:16 07/06/12 (6)
- RE: pinging Time Stands Still - Time_Stands_Still 13:22:48 07/06/12 (5)
- RE: pinging Time Stands Still - Jive Turkey 15:11:10 07/06/12 (4)
- RE: pinging Time Stands Still - Time_Stands_Still 15:16:58 07/06/12 (3)
- RE: pinging Time Stands Still - Jive Turkey 17:08:47 07/06/12 (2)
- RE: pinging Time Stands Still - Time_Stands_Still 17:32:14 07/06/12 (1)
- RE: pinging Time Stands Still - Jive Turkey 17:35:55 07/06/12 (0)