Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: I am running with the brush down. posted by gonzo on May 28, 2012 at 03:15:56:
"Per Jico's instruction I am running between 1.25-1.5 gm. I did the VTF with the brush up at 1.8-1.9 gm and subtract the 0.5 to account for when the brush is down"
It is my understanding that the Jico brush only substracts 0.25g? So not the same 0.5g as the original Shure brush.. So either you run with the brush up at 1.25g or with the brush down at 1.5g.
Right now it seems that you are effectively running at 1.55-1.65g (1.8-1.9 minus 0.25). That could explain the sound you are hearing as VTA will be changed quite a bit from the added VTF.
Have you tried 1.25g with the brush up just to confirm?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I am running with the brush down. - krenzler 05:24:03 05/28/12 (2)
- Thanks for the heads up. I was using the brush "weight" - gonzo 07:40:18 05/28/12 (1)
- RE: Thanks for the heads up. I was using the brush "weight" - krenzler 12:37:07 05/28/12 (0)