Vinyl Asylum Welcome Licorice Pizza (LP) lovers! Setup guides and Vinyl FAQ. |
|
In Reply to: RE: Bob's Devices SUT's posted by dzdnconfused on April 23, 2012 at 15:10:32:
The 10-15 ohms is what the cartridge should "see" after the impedance has been transformed based on the SUT gain. At 1:36 (your Cinemag), the 10-15 ohms range is covered but you have to use a loading resistor in parallel with the 47K phono inputs.For example, at 1:36 gain, if you want very close to 15 ohms seen by the cart, you can connect/strap 33.2Kohms at the input of the phono section or the output of the SUT (whichever is convenient to you) and the cart will "see" 15 ohms.
You can calculate it yourself using the link below
Edits: 04/23/12 04/23/12
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The 3440A will work. - amandarae 17:31:16 04/23/12 (0)