|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Where to get replacement RCA connectors for 834P? posted by Dan_ed on July 19, 2003 at 06:00:23:
Can you tighten it down? Sounds like you're losing your ground. Check the nut on the back, some RCA's are grounded to the chassis (some are not). You can tell if it's NOT a grounded type as there should be some kind of plastic shoulder washer.BTW-visual inspection of a solder joint is no substitute for using a meter to check, When in doubt, resolder.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Maybe it's just loose... - randallt 18:15:42 07/19/03 (1)
- Re: Maybe it's just loose... - Dan_ed 18:35:57 07/19/03 (0)
You can not post to an archived thread.
[Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2013, Audio Asylum, all rights reserved ] [ Take5 ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]
