|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: I have a Topaz 91001-11 1KV iso trans posted by web geek on April 8, 2002 at 12:28:18:
When you take off the covers:input side put jumper between h2 and h3 -this is in series. Do the same for the output side - jumper x2 and x3 in series also.Now on the input side - connect either h3 or h2 to ground - this give the reference to ground +/- 60 volts. On the output , connect x2 or x3 to ground.Now you have symmetrical AC.Put a fuse on the input somewhere from the wall for safety.That's it.Let me know how it goes.I email you the diagram.Mike
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: I have a Topaz 91001-11 1KV iso trans - audiodoc 16:09:00 04/08/02 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
