|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: DIY interconnect with integrated passive filtering? posted by Awe-d-o-file on January 13, 2017 at 18:36:55:
I need the atténuation due to a major difference in sensitivity between the low-pass amplifier and the high-pass amplifier. The latter has its own input volume control for fine-tuning.
Let's say I want attenuation AND low-pass filter in the same interconnect; i would then put the filter in the interconnects that are at the preamps out, and the attenuation in the plugs that are in the power amps input, that would be the "correct" way to do it, right?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: DIY interconnect with integrated passive filtering? - KanedaK 06:34:56 01/16/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
