Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Success!!! You guys are the BEST!! posted by MannyE on November 6, 2016 at 20:09:10:
Awesome, Manny. Glad to see it's alive!
And any self-respecting audiophile would honor their work by putting it in a separate box. :) Got this one on Ebay for $20. Nothing fancy, just two mating aluminum extrusions for the top and bottom and a couple powder coated end plates.
Finished stuffing the board last night, so the next step is to put everything in the box. I'm running the umbilical (Canare 4-wire in a star-quad lay) straight in to the board. No connector on the power supply, just a strain relief where the cable exits, and then an Oyaide plug on the end to go into the Wyred reclocker.
Hole in the front plate (below) is for the LED. Assembled board on top just to convey the size. Transformer is a Talema, but the same VA as yours so probably very similar in size. As an added bonus, you just haven't really lived fully until you spend over an hour Dremel-ing out the hole in the back plate for the IEC. :)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Success!!! You guys are the BEST!! - bcowen 17:29:26 11/07/16 (2)
- RE: Success!!! You guys are the BEST!! - MannyE 18:23:03 11/07/16 (1)
- RE: Success!!! You guys are the BEST!! - bcowen 18:52:57 11/07/16 (0)