RE: I just need a simple reliable. . - Awe-d-o-file - Tweakers' Asylum

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

RE: I just need a simple reliable. .

Awe-d-o-file

In Reply to: I just need a simple reliable. . posted by John PA on August 14, 2016 at 11:54:13:

I got one off eBay and it works fine. Let me first say I was a tech and just used a heat gun for removal and a Weller Iron with a small tip to resolder 20 pin chips in place 3that were small enough to fit two or three on a dime. I also did 64 pin square processor chips the size of a quarter with that method. The station at the link works better. It has adjustable temp for the heatgun too. For as cheap as it is I thought it would be junk but no. So I went to look it up on eBay and it now has a meter too and other features, more tips, solder wick and a chip extractor. I highly recommend it for that little money.

ET

"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
even more now (Open in New Window)

Edits: 08/18/16 08/18/16

This post is made possible by the generous support of people like you and our sponsors:

Follow Ups Full Thread

Topic - What is a good quality but not too expensive a hot air rework station? - John PA 12:32:25 08/13/16 (9)

John,what are you going to use it for? - Michael Samra 00:58:53 08/14/16 (8)

I just need a simple reliable. . - John PA 11:54:13 08/14/16 (7)

RE: I just need a simple reliable. . - Awe-d-o-file 08:48:59 08/18/16 (2)

Thank you for the link and . . - John PA 10:33:30 08/18/16 (1)

RE: Thank you for the link and . . - Awe-d-o-file 17:08:20 08/18/16 (0)

What else are you using to help remove... - Cougar 10:44:44 08/15/16 (3)

Thanks for the info. . . - John PA 13:12:40 08/15/16 (2)

Which one? - Cougar 15:10:50 08/15/16 (1)

I see one on Amazon and Ebay. .. - John PA 15:18:07 08/16/16 (0)

Follow Ups

RE: I just need a simple reliable. . - Awe-d-o-file 08:48:59 08/18/16 (2)

Thank you for the link and . . - John PA 10:33:30 08/18/16 (1)

RE: Thank you for the link and . . - Awe-d-o-file 17:08:20 08/18/16 (0)

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.