|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: RC Snubber 0.1uF 250VDC with integrated R100 resistor vs. 0.1Uf 250VACDC Wima MP3-X2 Cap posted by old guy 42 on July 28, 2016 at 05:06:51:
old guy 42 or anyone else willing to respond, according to the link the resistor is to be wired in series with the X2 cap. Should the resistor be in line before or after the capacitor and what of adding a varistor to reduce start-up spike(s). The above electrical components will be added to an AC outlet that is being installed into an 1.8kw Topaz noise isolation transformer, to power my front end components.
Thanks to all.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Resistor before or after the X2 capacitor when wired in series? - dcuhl 09:55:09 07/29/16 (3)
- RE: Resistor before or after the X2 capacitor when wired in series? - Ugly 09:35:58 07/30/16 (2)
- Understood and what of the varister? should it run in parallel? - dcuhl 17:50:40 07/30/16 (1)
- It finally dawns on me that won't the 250V X2 cap... - dcuhl 07:39:15 07/31/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]