Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

RE: LSA 1 monitor speaker crossover upgrade ?

Posted by Mr. Dick Hertz on July 21, 2016 at 16:55:48

In Reply to: LSA 1 monitor speaker crossover upgrade ? posted by theromium on July 21, 2016 at 16:16:43:

Re-designing the crossover is certainly possible. But if you wanted to go that far, then consider possible driver replacement as well. If you went that way you might as well buy new speakers.

As an alternative you could replace the capacitor(s) and resistor(s) in the existing crossover. Reasonable prices for caps can be had at Parts Express or Meniscus. Solen, Audyne, or some Clarity caps are worth considering. Resistors should be at least 10W and non-inductive. I prefer Lynx or Mills resistors. I'd avoid the sand cast types.

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---