|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Fuse choice and safety ? posted by Tweaker456 on April 24, 2016 at 15:59:40:
The fuse was chosen by the designer to protect the device based on some element of the design which would be stressed by input currents larger than the fuse rating.
Whether the diodes you changed out happened to be that particular weak link in the original design that set the fuse size/rating would require intimate knowledge of all aspects of the design.
To jump to conclusions about the rest of the design based on changing out some diodes sounds very very risky to me.
I advise caution here. Based on what I know now I would recommend not increasing the value of the fuse
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Fuse choice and safety ? - Ugly 08:54:20 04/27/16 (1)
- RE: Fuse choice and safety ? - Tweaker456 15:10:07 04/27/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
