|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Nissei styrene and copper foil pf values?? posted by Tweaker456 on April 8, 2016 at 12:08:29:
Depends on my mood, but I will usually use any good film capacitor in my stash. And, sadly or fortunately, I have a lot of capacitors in my stash. I also try to follow the suggestion of Morgan Jones and use bypass capacitors that are about 1% the value of the capacitor being bypassed, in a Power Supply. I do not tend ever to bypass a coupling capacitor. When I have done it, I have regretted it, except in one case: I bypassed a 10uF electrolytic (ELNA Silmic II), that had to be used as a coupler due to space limitations, with a 0.1uF teflon. That combo worked nicely. But normally one would not ever have to use a 10uF coupling cap.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Nissei styrene and copper foil pf values?? - Lew 12:23:50 04/08/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
