Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: help a first-time crossover builder posted by beautox on October 12, 2015 at 15:55:40:
If I were starting from scratch I would decide the frequency and set the distance. If you boxes are built you may have to do it that way, yes. A new baffle could change that for you too.
Oh, another thing, if you can get hold of a Woofer Tester(Partsexpress) then you can measure all the spec's yourself. Good Luck, bobwire
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: help a first-time crossover builder - bobwire 16:27:45 10/12/15 (0)