|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Increasing output of acoustic revive rr-77 posted by Sondek on October 4, 2015 at 09:23:21:
With a couple of swabs of grey electrical tape the light was still visible, but dimmed sufficiently not to be a distraction. You still want to know when the unit is on. I was able to hide most of the cabling by using a short xlr umbilical, installing a single wpo high up in my electrical cupboard & cutting a small hole in the top vented cover to route the power cable. I was really happy with how it worked out.You could try building a wood stand in the same color as your existing cabinet and see how it looks. Then again, an RR-77 + KR psu at a less than optimal height/location is better than no RR-77.
Edits: 10/04/15 10/04/15
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Increasing output of acoustic revive rr-77 - Bodhi 10:10:48 10/04/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]