Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Increasing output of acoustic revive rr-77 posted by eduardoo on October 3, 2015 at 05:39:29:
If you want to build a larger antenna that will fit into the same physical volume you will have to uses smaller wire and if you want a much larger antenna you will need to use much smaller wire. You need to look at the antenna inside your unit you have not done so perhaps if you look up some information on the type of flat winding this is. Here is a link you can do some reading up. http://www.diyaudio.com/forums/everything-else/162477-diy-schumann-resonator.html
moray james
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Increasing output of acoustic revive rr-77 - moray james 07:14:34 10/03/15 (5)
- RE: Increasing output of acoustic revive rr-77 - eduardoo 22:40:00 10/03/15 (4)
- RE: Increasing output of acoustic revive rr-77 - moray james 07:24:52 10/04/15 (3)
- RE: Increasing output of acoustic revive rr-77 - eduardoo 20:14:24 10/04/15 (2)
- RE: Increasing output of acoustic revive rr-77 - moray james 22:35:43 10/04/15 (1)
- RE: Increasing output of acoustic revive rr-77 - Lew 07:21:58 10/09/15 (0)