Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: please clarify posted by jad on September 21, 2015 at 06:51:35:
Very nice construction.
If you are interested, and I believe you might be because you've already gone to great lengths, you could try the Z-foil resistors in a few critical paths such as feedback only in the high pass filters. No need for them in low pass areas. If odd values are required, you might have difficulty getting them from a commercial supplier, but perhaps Texas Components could help you.
I've read that those Relcap styrenes (RTE?) can be a little sharp. I've never tried them. I bought some styrene caps on eBay. The ones with magnetic leads didn't sound very good, but another batch with non-mag leads and larger physical size are very nice.
Peace,
Tom E
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- a suggestion - madisonears 19:25:43 09/21/15 (4)
- RE: a suggestion - jad 06:01:25 09/25/15 (3)
- Any letter designation on the Relcaps??? - Lew 13:14:31 09/25/15 (2)
- RE: Any letter designation on the Relcaps??? - jad 15:02:26 09/25/15 (1)
- That's good info, thanks. - Lew 16:36:02 09/25/15 (0)