|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Help with aftermarket fuse value selection posted by pc123v on August 30, 2015 at 13:31:41:
I suppose this is obvious, but the lower than recommended value (0.5A) may blow prematurely or inappropriately, causing loss of an expensive fuse. Using a higher than recommended value (1.0A) risks damage to your equipment, if there is a critical event occurring above 0.8A and below 1.0A. But you said nothing about slo vs fast-blow fuse types. I'd advise you not to use a slo-blow if the recommended 0.8A fuse is fast-blow. That would be asking for trouble.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help with aftermarket fuse value selection - Lew 21:01:05 08/30/15 (4)
- RE: Help with aftermarket fuse value selection - pc123v 22:13:57 08/30/15 (3)
- It's a mystery to me... - Lew 20:11:37 08/31/15 (0)
- RE: Help with aftermarket fuse value selection - Old SteveA 10:07:56 08/31/15 (0)
- RE: Help with aftermarket fuse value selection - jea48 09:25:48 08/31/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
