Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

RE: A quick "fix" for a missing "locking barrel" on an Interconnect cable

Posted by Duster (M) on May 25, 2015 at 14:17:07

In Reply to: A quick "fix" for a missing "locking barrel" on an Interconnect cable posted by Old SteveA on May 24, 2015 at 16:45:11:

A clever DIY solution on your part. It might not be an obviously audible issue to address, but you might want to experiment by building an identical DIY barrel that matches what you already built, and try it on the other cable being used for the other stereo channel. Position each DIY barrel at the same end of each of the two cables (both at source end of the two cables, or both at the load end of the two cables). Barrels can impart a particular sonic signature, so a set of identical right and left cables might be better sonically matched, even if ever-so-slightly to your ear.

This post is made possible by the generous support of people like you and our sponsors:

Amplified Parts

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---