Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Your best tweaks for fullrange posted by Dryginger2 on May 8, 2015 at 06:21:35:
driver design will dictate if you will enhance efficiency at all. Well designed drivers should be running either very close to or right at saturation so additional flux wont gain you much with those. Gains in driver efficiency tell you the driver was not as well designed as it could/should have been. Good way to extract all the flux that you can from a magnet and to provide shielding.
A layer of copper around the magnet can help reduce inductance a little as well. Every little bit helps, but how much you never know till you try. Best regards Moray James.
moray james
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Your best tweaks for fullrange - moray james 07:56:40 05/08/15 (4)
- RE: Your best tweaks for fullrange - Dryginger2 09:26:16 05/08/15 (3)
- RE: Your best tweaks for fullrange - moray james 11:32:44 05/08/15 (2)
- RE: Your best tweaks for fullrange - Dryginger2 17:15:23 05/08/15 (1)
- RE: Your best tweaks for fullrange - moray james 00:25:35 05/09/15 (0)