Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

---

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]

---

[ Alert Moderator ]

---

RE: Tweeking Sirius Radio Receiver

Posted by Duster (M) on May 5, 2015 at 12:39:16

In Reply to: RE: Tweeking Sirius Radio Receiver posted by David Pritchard on May 4, 2015 at 19:46:37:

I don't think it's possible to find a replacement DC cord with the same locking connector at one end, and a DC plug that fits the Sirius receiver at the other end. The molded DC plug for the power supply upgrade you ordered is 2.1mm x 5.5mm which is a very typical size, whereas the DC plug for the Sirius receiver seems to be a narrower size. So you have a few options. If you can DIY, other than building a new DC cord from scratch, snipping-off the molded DC plug of the DC cord and re-terminating it with the proper size DC plug would be the best option. If you don't DIY, a compromise of using a DC plug size adapter would be the solution. There are a number of options for DC plug size adapters, including a right angle type. I can't seem to find the exact size for the Sirius receiver, so I suggest you contact BixNet.com which carries many DC plug size adapters in order to obtain the proper adapter.

See link:

• http://www.bixnet.com/connectors.html   (Open in New Window)

This post is made possible by the generous support of people like you and our sponsors:

Signature Sound

[ Signature Sound Lounge ]

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---