Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Question about Hi End Fuse (HiFi Tuning,Synergistic, etc) use posted by Old SteveA on May 4, 2015 at 10:04:01:
A fuse is basically a wire calculated to burn up when it heats up due to passing excessive current. Under normal use, I don't see how that can add noise. In my particular imagination, fuse holders are more suspect than fuses. However, I and several others heard a really weird phenomenon the other week. We were auditioning a very high end TVC (Transformer Volume Control). We all agreed it sounded wonderful with its stock no-name fuse. We had been debating the effect on sonics of fuses, so someone suggested replacing the standard fuse with an expensive boutique fuse. The designer of the TVC who was among the group told us that the fuse was only for the electrical circuit that lights up the LEDs that show relative level and relays that switch among inputs. There was no fuse in the TVC circuit at all, because after all a TVC is entirely passive. Nevertheless, we replaced the standard fuse with an expensive fuse, and right away, 5 out of 5 people in the room, all of whom are very experienced audiophiles, agreed that the sound got worse. The sound lost a lot in terms of dynamics and its capacity to separate instruments in space. When the original fuse was restored, the sound came back to its original glory. So, first of all, I was shocked to hear ANY difference at all, but second, this shows that one cannot assume that more expensive = better. But WHY we heard any difference, I do not understand.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Question about Hi End Fuse (HiFi Tuning,Synergistic, etc) use - Lew 14:14:15 05/04/15 (2)
- In-friggin'-credible!!! - rlw 06:43:19 05/07/15 (1)
- Fortunately for the integrity of our beautiful Chinese rug,... - Lew 11:16:36 05/07/15 (0)