Home Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

[ Follow Ups ] [ Post Followup ] Thread: [ Display  All  Email ] [ Tweakers' Asylum ]
[ Alert Moderator ]

DIY Detail Magnifier










First, thanks to econotweaks.com for generously sharing the info for the DIY version of their DETAIL MAGNIFIER. This is probably nothing new for most of you but was a great project for me. After looking at the schematic I realized even I could build them. I took advantage of that generosity and built four of them. The end result is a cleaner more detailed sound. Really.
I used 1" x 1/2" copper tubing for the housing. Twelve (12) gauge silver wire for the leads. Audience Auricap XO .022uF /600V caps. Dale mil-spec 10 ohms 1/2 watt resistors. Rat Shack silver bearing solder. After soldering was completed I stuffed the housing with rope caulk since I forgot to buy silicone caulk. I then wrapped it up tight with a generous application of copper tape. I then tested one on the right speaker for several hours and concluded that I had done everything right. A very nice audible improvment.
Again, thanks to enconotweaks.com.


Hear's to yah,
pixelphoto (Marvin)

This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  

Topic - DIY Detail Magnifier - pixelphoto 22:36:13 04/09/15 (37)
FAQ

Post a Message!

 Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.

[ Top Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2024, Audio Asylum, all rights reserved ]
[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]