Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: ERS paper and interconnects posted by aupiho on March 25, 2015 at 08:02:56:
A single Z sleeve is not quite effective as running one per channel of course, but you gain about 90% of the gain of running a split z sleeve
Original design alternated ERS with brass shim stock. I find that using copper foil is significantly more effective and that less layers are needed. Mark originally would run three or four layer of ERS and then a the brass. I simply alternate the ERS and copper, with very good results. I run perhaps three to four layers
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: ERS paper and interconnects - unclestu 12:00:11 03/25/15 (22)
- RE: ERS paper and interconnects - aupiho 00:18:25 03/26/15 (21)
- Why, Thank you - unclestu 00:41:57 03/26/15 (20)
- RE: Why, Thank you - aupiho 02:18:08 03/27/15 (15)
- tailpieces - unclestu 11:25:31 03/27/15 (14)
- RE: tailpieces - aupiho 14:07:13 03/27/15 (13)
- RE: tailpieces - unclestu 18:03:26 03/27/15 (12)
- RE: tailpieces - aupiho 00:27:27 03/28/15 (11)
- RE: tailpieces - unclestu 00:51:42 03/28/15 (10)
- RE: tailpieces - aupiho 03:50:39 03/28/15 (6)
- RE: tailpieces - unclestu 14:08:22 03/28/15 (5)
- RE: tailpieces - unclestu 13:41:16 03/29/15 (4)
- RE: tailpieces - aupiho 08:34:25 04/22/15 (0)
- RE: tailpieces - theob 09:36:30 04/01/15 (2)
- RE: tailpieces - beautox 02:10:45 03/28/15 (2)
- RE: tailpieces - unclestu 14:16:27 03/28/15 (0)
- RE: tailpieces - aupiho 03:35:58 03/28/15 (0)
- RE: Why, Thank you - theob 03:29:09 03/26/15 (3)
- Thanks for the response - unclestu 14:22:04 03/26/15 (2)
- RE: Thanks for the response - theob 16:30:48 03/26/15 (1)
- RE: Thanks for the response - unclestu 17:04:58 03/26/15 (0)