Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Help installing RCAs on TD147 posted by pete3m@gmail.com on March 13, 2015 at 13:06:07:
Canare L-2B2AT is actually intended as hookup wire rather than microphone cable. Connect the drain wire for the foil shield to the rca jack only (don't connect it at the tonearm end).
To help minimize interference from the AC line, keep the power cord well away from the phono-level cable. Furthermore, an IEC inlet can also be mounted on the back panel, well away from the rca jacks, using a tightly twisted pair of flexible stranded hookup wire. A dual-shielded (braided shield + foil shield) power cord can be plugged into the IEC inlet for a potentially lowered noise floor. YMMV
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Help installing RCAs on TD147 - Duster 13:36:32 03/13/15 (0)