Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: have you opened the unit? posted by unclestu on December 14, 2014 at 09:33:58:
I removed the rivets and replaced them with screws. The parts are hardwired with a complicated wiring scheme via basic hook-up wire and what looks like a short length of 12 AWG fine strand count speaker wire. I've considered upgrading the wiring, but Mike likely selected the specific wires by ear, so I do not wish to alter any tuning he may have intended. The only modifications I've done at this point is replace the stock Schurter IEC inlet with an Oyaide Power Inlet R IEC inlet, replace the stock X2 safety cap with a WIMA MP3-X2, replace the stock Schurter snap-in AC receptacle with the Neutrik NAC3MP-HC powerCON 32A AC jack, and replace the stock 3M Bumpon feet with a set of Herbie's Audio Lab Tenderfoot feet.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: have you opened the unit? - Duster 10:57:33 12/14/14 (1)
- doh!!! - unclestu 11:07:16 12/14/14 (0)