Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Outstanding Cone Speaker Tweak! posted by Dryginger2 on December 5, 2014 at 11:34:09:
It would be for 8 tweeters shaped like a Peerless (rectangle w/rounded corners) and 16 6-1/2" drivers. 96 screws too and I can't remember if they are wood screws into wood or machine screws into a metal sleeve which would still leave other metal there. I guess the key is non-ferrous metal right?Anyway I'm still not sure if you mean to simply put a rubber washer like cut out w/each screw or a cut out that goes all the way round the outer perimeter of each driver. If the latter sheets 7X7 inches are larger would do best. I've seen rolls or reels of 1" wide stuff too but that's nearly impossible to work into a circle for the 6-1/2" drivers but could be made to work for the rectangular tweeters but not very easily.
Sorry for the thick skull here
E
T
ET
"If at first you don't succeed, keep on sucking till you do suck seed" - Curly Howard 1936
Edits: 12/05/14 12/05/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- FYI - Awe-d-o-file 12:56:34 12/05/14 (1)
- RE: FYI - Dryginger2 13:26:29 12/05/14 (0)