Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Very surprised at the detrimental effect of stock binding posts posted by Paul Tobin on November 27, 2014 at 16:35:23:
I have been using a binding post bypass system for over 15 years and will so on my new Class A amps I will be making soon. Also works on speakers. Basically, you use a binding post as a clamp. You bring the wire from inside the amp or speakers through a hole in the chassis/box and wrap the wire (tinned) around the outside of the binding post or through its hole. You then clamp your speaker wire directly to the wire that is wrapped around the post. You still get to have the usability of having a binding post but you get the sound of $400 set of connectors for very little. I am going to be using the $27 a set of four connectors from Parts Connexion: http://www.partsconnexion.com/product7481.html.
They have a hole in the post and also open far enough to be useful...also you can cut the red insulator on the back and use the hot and ground separately.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Binding post bypass.....same great sound as silver posts but very cheap! - Ric Schultz 14:09:30 11/28/14 (4)
- RE: Binding post bypass.....same great sound as silver posts but very cheap! - Mike B. 12:29:35 11/29/14 (0)
- RE: Binding post bypass.....same great sound as silver posts but very cheap! - Paul Tobin 15:22:17 11/28/14 (2)
- RE: Binding post bypass.....same great sound as silver posts but very cheap! - Ric Schultz 15:50:15 11/28/14 (1)
- There's always something better - Paul Tobin 16:48:53 11/28/14 (0)