|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Less is more, no doubt...... posted by MannyE on October 12, 2014 at 13:22:58:
I use SST, and I like the effect, on any connectors that do not get very hot during use. However, many have reported problems with SST and other similar products when applied to the pins of output tubes in an amplifier, which get very hot. I am not sure what the problems have been, but I have duly avoided using the grease on output tube pins.
As one might expect, IMO, the most profound positive effect of SST is to be had by applying it to connectors in the phono chain, starting with the cartridge pins. However, less is more, as someone else said. A small jar from Walker Audio lasts nearly forever (now that Walker supplies some oil to re-suspend the sludge periodically), so hang the cost.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- tube pins - Lew 07:11:40 10/15/14 (1)
- RE: tube pins - MannyE 13:16:40 10/22/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
