Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Circuit breaker - Equipment protection fuse question. posted by jea48 on June 12, 2014 at 06:37:18:
Thanks all for the advice. The configuration is as follows: Square-D Service Panel > Square-D 15 amp Breaker > 12 gauge Romex (solid core) > Duplex Box > Pass & Seymore 20 amp 8300 Recepticle > Pangea Power Cords > Amps (Monoblock's - 15 amp cord plugs, both sides inlet/outlet, 10 amp slo-blo protection fuse(s) - one per amp).
My thought was that ONE of the amps, might be keeping the other amp from drawing all the current that it needs during complex/loud passages, in a parasitic way.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Circuit flow goes like this.... - dcuhl 04:43:30 06/14/14 (4)
- RE: Circuit flow goes like this.... - jea48 20:54:07 06/14/14 (3)
- RE: Circuit flow goes like this.... - dcuhl 09:41:41 06/16/14 (2)
- why mess with it at all? - cloudwalker 00:46:31 06/18/14 (1)
- RE: why mess with it at all? - Crazy Dave 12:04:36 06/18/14 (0)