|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Need an overview to replace fixed voltage reg with adjustable voltage reg, posted by Ugly on March 19, 2014 at 19:03:35:
Hi Ugly
Ok, you've lost me.
Why is a voltage divider calc relevant to calculating R values in a adjustable voltage reg? Input voltage is not relevant other than not going to below the dropout voltage or exceeding the max Vin right?
Apologies for the questions, but I new at this.
But to your point, np, I can substitute the 100ohm for the R2 spot.
Regards
Paul
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Need an overview to replace fixed voltage reg with adjustable voltage reg, - Cleet Torres 20:46:20 03/19/14 (2)
- RE: Need an overview to replace fixed voltage reg with adjustable voltage reg, - Ugly 21:34:26 03/19/14 (0)
- RE: Need an overview to replace fixed voltage reg with adjustable voltage reg, - Ugly 21:13:44 03/19/14 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
