|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: RE: Absolutes like that are absolutely wrong ;-} posted by amioutaline? on August 17, 2012 at 18:51:47:
Do you cut off an inch or two of component lead so you can solder another wire to the part? I believe the extra solder joint would affect sonics more than an extra inch of wire. Most quality components have copper leads. What wire is so superior that you can detect a difference of a few inches?
Besides, soldering to a "nub" on a capacitor could lead to destruction of the cap. Even an inch or two of lead will dissipate a lot of heat before it gets to sensitive dielectric layers.
Peace,
Tom E
berate is 8 and benign is 9
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Not sure what that last bit means... - madisonears 17:21:02 08/19/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
