|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Manufacturers of PCB prototypes - Recommendations posted by megalomaniac on June 12, 2012 at 16:35:13:
I use PCBFabExpress a lot. They have a fairly high setup fee but a very low per inch and multiple board charge thus they are great for larger boards.
For small boards I use OSH Park, it's $5 per inch for 3 boards, $5 gets you three copies of a 1 square inch board. There is no setup or shipping charges, when it says $5 that is all you pay. I just did a display board for a DAC I'm building and it cost $7.50 for three boards, thats it!
But if you want to go with say a 4 x 10 inch board that's $200 for three boards, PCBFabExpress will do that for $120 including shipping.
If you do tiny little SMD boards oshpark is great, but when you start doing tube circuits with large high voltage caps etc PCBFabExpress is definitely the way to go.
John S.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Manufacturers of PCB prototypes - Recommendations - John Swenson 17:13:17 06/12/12 (2)
- Second for OSH Park - jihad 18:29:17 06/12/12 (1)
- RE: Second for OSH Park - mehrdadb_gd 16:20:35 06/27/12 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
