Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: I would remove the fuses, but i plan on movingup to 20.7s and do not want to modify my 3.6s ... nt posted by Elizabeth on April 26, 2012 at 05:05:42:
Even a HINT of abuse lowers resale value.
Good News? If you do the change properly, it is 100% reversible. Take a few pictures, perhaps. The camera is your friend.
The 'poor mans' way to remove the fuse from the circuit is to simply unscrew the retaining nut from side 'a' of the fuse holder and move the ring tab to side 'b'. re-secure.
Fuse gone....but the number of connections and wire ends up not as simple/few as possible.
Even poorer? Get some wire of the right length....1.25" and simply replace the fuse. You can do it this way without removing the connection panel....or wherever the fuses are located.
Let me know when you want to sell the 3.6s and I'll try to buy 'em.....
Too much is never enough
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: I would remove the fuses, but i plan on movingup to 20.7s and do not want to modify my 3.6s ... nt - pictureguy 08:41:15 04/26/12 (0)